The picture above shows a TBI complete system for a 2bbl Ford V8. Some of the components shown above may look different from what will be included with your kit. The complete TBI system comes with all components needed for an open loop system except for spark arrester, throttle cable/linkage, and USCG approved fuel lines. Scroll down for complete description and prices.

Order

Select Engine : 289 Small Block V-8 (+$1,495.00) 302 Small Block V-8 (+$1,495.00) 351 W/C/M V-8 (+$1,745.00) 460 Big Block V-8 (+$1,745.00) Harness Length : 30" Standard 48" (+$30.00) 60" (+$60.00) 72" (+$90.00) 84" (+$120.00) 96" (+$150.00) Select Adapter Plate : Four Barrel Square Bore Four Barrel Spread Bore (+$75.00) One Barrel (+$75.00) Two Barrel (+$75.00) -No Adapter Needed- (-$50.00) Distributor Options : ECM-Controlled Distributor -recommended- Tach Filter -requires electronic ignition- (-$320.00) Tach Wire -requires MSD 6M ignition module- (-$395.00) O2 Sensor : Heated O2 and Adapter -Recommended- +275 None -Open Loop- Project Comments: Please give us as much information as you can about your project. We will review your order before it ships and attempt to contact you if there are any issues : Quantity :  The selected item is out of stock, please select a different item or combination

Here is what your marine TBI system will include.

• -TBI unit with TPS and IAC control
• -TBI adapter plate, gaskets and hardware.
• -EFI distributor for full spark and fuel control
• -ECM (production GM unit must be in waterproof area or container)
• -Custom built wiring harness for your boat.
• -External USCG approved Fuel pump with relay and filter.
• -ECT, MAP sensors. (open loop operation)
• -Check engine light.
• -Installation instructions.
• -Warranty all components for one year.
• -Tech Support.
• -Many miles of low maintenance fuel injection operation.

Terms of Sale

Browse more in Ford category